To enable the investment in new hardwood floors to last for many years, it is crucial to understand the differences in solid and engineered real wood flooring. Several factors must be considered to select the best option per each unique situation. Homeowners can feel good about choosing their whole hardwood flooring toronto if they learn a few basics first.
Reliable Hardwood Flooring
Solid hardwood flooring is milled from a solo piece of lumber, and it is available either unfinished and prefab. Unfinished hardwood flooring is sanded, stained, and coated onsite after installation. This method allows for custom stain colors to match your home’s décor, or simply to create a unique appearance. The downside that will unfinished flooring is that there is often a considerable mess from sanding the flooring as well as fumes from the stain and urethane topcoats. High quality contractors do have equipment that will minimize the dust particles from sanding process. They may also offer low VOC discolorations and water-based urethane coatings to reduce the fumes connected to oil-based products. This finishing process can be done multiple amount of time in the future to restore the beauty of the floor as it wears over time. Sturdy hardwood flooring is best installed over a wood subflooring substance as it is generally nailed or stapled to the subsurface. Continually install solid wood flooring above grade as it is highly subject to moisture and may warp in damp areas.
Engineered Wood floor Flooring
Engineered hardwood flooring is a mix of multiple layers with wood veneers and a synthetic material that are laminated together with each other to form each plank of flooring. This synthetic stuff serves as the bottom layer and is generally impervious to moisture content. This resistance to moisture from below makes this an excellent preference for concrete subfloors and rooms that are below score. All engineered flooring comes prefinished from the factory. A benefit to prefinished engineered wood flooring is that the factory is oftentimes able to coat the finish as many as 7 times or more. The following creates an extremely durable surface that will stand up to a great deal of website traffic. Still, the top layers of engineered flooring are made of pure wood and can be scratched or damaged by water. Made hardwood flooring tends to be much thinner than solid wooden flooring and it is often glued to the subsurface though it can also be nailed or stapled. The thinner nature of made flooring reduces or eliminates the option of refinishing the floorings when they wear over time.
Laminate flooring is produced from synthetic materials and contains no natural wood products. Due to this, laminate flooring is extremely resistant to moisture. The finish of layered flooring is plastic-like and extremely durable. Laminate flooring is available in a number of colors and finishes that mimic wood flooring, floor tile, and stone. Laminate flooring is often called a “floating floorboards, ” as it does not require the use of glue or nails to stick it to the subsurface. This is a good choice for areas of which see an extremely high traffic volume or are susceptible to marring or gouging for other reasons, such as pets.